4 Ton Telescopic Forklift

SOCMA Telescopic Forklift:

Introduction

SOCMA telescopic forklift is a new type of loading and unloading machine,which was equipped with fork and side shifter. The machine is suitable for the lifting and stacking of cargoes, and can also be used in installation and maintenance of road lighting equipments and installation of various underground pipes(such as water pipes, gas pipes, etc.). And can be widely applied to factories, stations, docks, freight yard, post and telecommunications, forest, building materials, warehouses and other places. It is a wide adaptability and high efficiency loading and unloading machine.

1. Using well-known brand diesel engine, strongpower, energy saving and environment protection, to meet the requirements of efficient operations

2.Double turbo hydraulic torque converter, stepless speed change. Single-lever control transmission system, with 2 speeds for forward and reverse gears, easier to operate

3.Use dual-pump combined hydraulic system, greatly reduce the fuel consumption and energy consumption

4.With full hydraulic coaxial flow amplification steering system, turning radius for rear steering axle is small, steering light and flexible

5.Using front wheel drive, rigid suspention, rear axle steering structure, can achieve four-wheel drive. Front axle spiral bevel gear and wheel side planetary wheel to

reduce the speed and increase torque, have excellent load capacity

6. Using the integral frame, can provide good rigidity and strength, to ensure high reliability of this type of chassis.

7.Working device is two stage quadrilateral telescopic working arm, telescopic arm use large cross-section, high-strength quadrilateral structure.

8.This model standard with forks, bucket, extension forks and aerial work platform are optional. Standard with quick hitch, can choose fork positional and sideshifter.

9.The use of adjustable direction machine, air seat, joystick control valve control distribution valve and work device oil, light and flexible operation, sitting more comfortable.

10.Using maintenance-free battery, cab match with fan, radio, air conditioning, more comfortable and reliable.

11.The whole shape of the atmosphere, beautiful and smooth; luxury wide view cabin, low noise and good sealing.

 12.This series models standard with electronic handbrake, compared to the soft-axis handbrake, have a substantial increase in the operability, asthetics and sensitivity.

13.This series models standard with electronic off-axle function, compared to the manual soft shaft off-bridge mechanism, the operation is more convenient and concise, the performance also been greatly improved, can achieve two-wheel drive and four-wheel

drive switch, can better adapt to different working conditions and reduce the degree of tire wear, protect the tiers better.

14.Parts are the localization, standardization, costeffective, easy to purchzase and daily maintenance. can 

PIC:John Chen

Email:John@socmachinery.com

WA:+86 18106938692

2Ton Telescopic Forklift                                                                                

Related Photos:                                                                                            

FORKLIFT RELATED NEWS:                                                                                                                           

1. Daily maintenance of lead-acid batteries:

1. Required labor protection products and tools

Digital multimeter: range 2V-500V

Hydrometer: 1.0-1.30g/cm3(30℃)

Thermometer: 0-100℃, Sleeve: 17mm

Wear rubber gloves and goggles before working

2. Battery set file

Number each group of batteries, establish an independent use file, arrange a special person to be responsible, truthfully record the use of the battery, the problems occurred during the use and the treatment methods, etc., and keep it properly, and keep abreast of the use status of the battery.

2. Daily maintenance:

1. When the power display on the dashboard of the forklift turns red (the remaining power is 20%), you must stop using it, and you need to prepare for charging as soon as possible, and you can no longer use it.

2. Unplug the battery and fork workshop, and open the upper cover of the battery pack.

3. Connect the battery plug to the matching charger plug, and place the connected plug on the outside of the power supply box to hang in the air. It is strictly forbidden to place the plug on the battery box or on the battery during charging.

4. Open all battery filling caps, be careful not to let foreign objects fall into the battery, and observe the battery liquid level.

5. Turn on the switch of the charger and start charging to ensure that the specifications of the charger match the model of the battery to avoid overcharging or undercharging of the battery. Do equalizing charging once a month and desulfurizing charging once a quarter.

6. Unplug the battery plug to connect with the charger plug

After charging, first turn off the power of the charger, and then unplug the charger and the battery plug. It is forbidden to pull the plug above the battery pack and keep away from the battery as much as possible. Do not unplug the plug before charging is completed.

7. Automatic water adding system

If the battery is equipped with an automatic water replenishment system, connect the water pipe plug after charging, and unplug the plug after the water replenishment is completed. Remember to add excess water before charging to avoid electrolyte overflow, corrosion of the box, and pollution of the environment.

8. Artificial hydration

When the electrolyte level is lower than the minimum level, add distilled water or deionized water. It is forbidden to add any acid solution. The added distilled water can be between the minimum level and the maximum level, but not higher than the maximum level.

9. After charging, pay attention to observe and record the charging time, charged power, temperature and other related content. Then cover all the battery filling caps, clean the surface of the battery with a rag, keep it clean and dry, and connect the battery to the forklift, and it can be put into use.

3. Weekly maintenance:

1. Measure the specific gravity of the electrolyte of each battery after the battery is fully charged, and make a record. If the specific gravity of the battery electrolyte can reach 1.29 g/cm3 (30°C), the battery can be used normally.

2. If it is found that the specific gravity of the battery electrolyte is lower than 1.29, please carry out balanced charging in time to ensure that the battery is fully charged before it can be put into use to avoid the occurrence of sulfation and affect the performance and life of the battery.

3. Check whether the connection between the batteries is damaged, so as to avoid the danger of charging and discharging and cause safety accidents, and ensure that the connection torque is 25Nm.

4. According to the battery usage record for a week, understand the charging status and usage status of the entire battery pack. It is strictly forbidden to overcharge and overdischarge the battery pack. The depth of discharge should not exceed 80%. If it cannot be guaranteed, equalization charging must be done once a week.

Fourth, monthly maintenance:

1. 2 hours after the end of charging, measure the voltage of each battery cell and the specific gravity after being fully charged, and compare with the data measured before. If there is a significant change or the difference between the cells is large, further testing is required, and if necessary, contact the after-sales service. department.

2. Check whether there is acid in the box, and extract the accumulated liquid in the box to avoid corroding the box and polluting the environment.

Hot Tags: 4 ton telescopic forklift, China, manufacturers, factory, customized