16t Forklift With Euro V Engine
Engine:to meet requirements for Euro market
Hydraulic transmission
Fork positioner with side shift
Full cab with AC
Rated load: 16,000kg
Load center: 600 mm
Fork length: 1200mm,can be customized
Specifications of 16t forklift suitable for Euro market:
|
Configuration |
Model |
Unit |
CPCD160S |
|
Vehicle configuration |
HNF-160S |
||
|
Character |
Rated Capacity |
t |
16 |
|
Load Centre |
mm |
600 |
|
|
Weight |
Self weight |
kg |
19800 |
|
Chassis |
Tyre no. |
4/2 |
|
|
Tyre, front |
12.00-20-18PR |
||
|
Tyre, rear |
11.00-20-18PR |
||
|
Wheels, numbers front/rear(x=driving wheel) |
4×/2 |
||
|
Wheel track, front |
mm |
1740 |
|
|
Wheel track, rear |
mm |
2013 |
|
|
Basic dimension |
Mast Tilt Angle (front/rear) |
° |
6/12 |
|
Mast height (fork lowered) |
mm |
3140 |
|
|
Lifting height |
mm |
3000 |
|
|
Mast height (fork lift) |
mm |
4640 |
|
|
Overall length (with fork) |
mm |
6355 |
|
|
Overall width |
mm |
2400 |
|
|
Fork size |
mm |
90x180x1200 |
|
|
Carrier width |
mm |
2200 |
|
|
Min. groundclearance-mast, full loaded |
mm |
225 |
|
|
Min. groundclearance-center of wheel base |
mm |
350 |
|
|
Min. turning radius |
mm |
4750 |
|
|
Parameter |
Speed (full loaded/without load) |
km/h |
23/26 |
|
Max. lifting speed (full loaded/without load) |
m/s |
205/255 |
|
|
Gradeability (full loaded/without load) |
% |
20/22 |
|
|
Service brake |
Disc brake |
||
|
Engine |
Brand |
CUMMINS |
|
|
Rated power |
KW |
97 |
|
|
Rated rotor speed |
min-1 |
2200 |
|
|
No.of Cylinder |
cm3 |
6 |
HNF series internal combustion counterbalance forklift is a product independently developed by our company, combining forklift and loader manufacturing technology. This product is completely domestically produced and possesses leading technology in the forklift industry. It can meet the needs of large-scale internal combustion counterbalance forklifts in industries such as mines, ports, airports, stations, warehouses, and mining sites (loading and unloading, stacking, and short-distance transportation).
Rules for the use of oil, fuel, and coolant in the 16t forklift
General provisions
● Due to the harsh operating conditions of forklifts and the presence of dust in the external environment, oil is prone to deteriorate. Once the oil is found to have deteriorated or contains excessive impurities, it should be replaced promptly. Even if the oil is clean, it should be replaced regularly according to maintenance requirements.
● The oil must be clean. Oil should be changed in areas with less dust to avoid contamination.
● The oil should be added in the specified quantity. Adding too much or too little can cause malfunctions. The oil level must be checked with the machine in a level position.
● After starting the diesel engine, the oil level should be checked again after 5 minutes of operation.
● When changing the oil, the relevant oil filters should be cleaned or replaced. If a large amount of metal particles or other impurities are found, please contact the maintenance personnel.
● Clean the oil filling container and filling parts. If the grease nozzle is damaged, it must be replaced promptly.
● The replacement of diesel engine oil should refer to the "Diesel Engine Use and Maintenance Manual".
● Different types of oil should not be mixed or used interchangeably. Otherwise, it will cause aging and failure of rubber parts and premature wear of components.
Hot Tags: 16t forklift with euro v engine, China, manufacturers, factory, customized
You Might Also Like
Send Inquiry