2Ton Telescopic Forklift

2Ton Telescopic Forklift

Telescopic Crane Loader
FEATURES
adopt hydro-mechanical transmission with two-speed forward and two-speed reverse, full hydraulic power steering,
and air-over-oil type drum brake; the working device is composed of the three-stage quadrilateral
telescopic boom and boom quick change device and hook. This telescopic crane loader is not only applicable
to lift the stone slabs in containers, but also can be used as a general crane, can be widely used in factory,
dock, freight yard, forest farm, construction material, warehouse, logistics and other industries.
It is a loading and unloading machine with wide adaptability and high efficiency.
Send Inquiry
Product Introduction


SOCMA Telescopic Forklift:

Introduction

SOCMA telescopic forklift is a new type of loading and unloading machine,which was equipped with fork and side shifter. The machine is suitable for the lifting and stacking of cargoes, and can also be used in installation and maintenance of road lighting equipments and installation of various underground pipes(such as water pipes, gas pipes, etc.). And can be widely applied to factories, stations, docks, freight yard, post and telecommunications, forest, building materials, warehouses and other places. It is a wide adaptability and high efficiency loading and unloading machine.

1. Using well-known brand diesel engine, strongpower, energy saving and environment protection, to meet the requirements of efficient operations

2.Double turbo hydraulic torque converter, stepless speed change. Single-lever control transmission system, with 2 speeds for forward and reverse gears, easier to operate

3.Use dual-pump combined hydraulic system, greatly reduce the fuel consumption and energy consumption

4.With full hydraulic coaxial flow amplification steering system, turning radius for rear steering axle is small, steering light and flexible

5.Using front wheel drive, rigid suspention, rear axle steering structure, can achieve four-wheel drive. Front axle spiral bevel gear and wheel side planetary wheel to

reduce the speed and increase torque, have excellent load capacity

6. Using the integral frame, can provide good rigidity and strength, to ensure high reliability of this type of chassis.

7.Working device is two stage quadrilateral telescopic working arm, telescopic arm use large cross-section, high-strength quadrilateral structure.

8.This model standard with forks, bucket, extension forks and aerial work platform are optional. Standard with quick hitch, can choose fork positional and sideshifter.

9.The use of adjustable direction machine, air seat, joystick control valve control distribution valve and work device oil, light and flexible operation, sitting more comfortable.

10.Using maintenance-free battery, cab match with fan, radio, air conditioning, more comfortable and reliable.

11.The whole shape of the atmosphere, beautiful and smooth; luxury wide view cabin, low noise and good sealing.

 12.This series models standard with electronic handbrake, compared to the soft-axis handbrake, have a substantial increase in the operability, asthetics and sensitivity.

13.This series models standard with electronic off-axle function, compared to the manual soft shaft off-bridge mechanism, the operation is more convenient and concise, the performance also been greatly improved, can achieve two-wheel drive and four-wheel

drive switch, can better adapt to different working conditions and reduce the degree of tire wear, protect the tiers better.

14.Parts are the localization, standardization, costeffective, easy to purchzase and daily maintenance. can 


PIC:John Chen

Email:John@socmachinery.com

WA:+86 18106938692


  

2Ton Telescopic Forklift                                                                                

Related Photos:                                                                                            





FORKLIFT RELATED NEWS:                                                                                                                           

The common sense of these forklift oil, there will be no one who does not know it

Midsummer is coming


Forklifts face the hot "baking" test of high temperature weather


Except for routine maintenance


A comprehensive professional inspection of the forklift is also required


to ensure the safe operation of production




hot sauna weather


Good operation of the forklift's heat dissipation, hydraulic, lubrication, and electrical systems


Inseparable from the correct use of forklift oil

Oil spoils easily in summer


Timely replacement of "no rollover"


Before using the car in summer, be sure to check the oil quantity, color and smell of the lubricating oil. If it is found that the lubricating oil is not enough, blackened, and has a burnt smell, it needs to be replaced in time. It is also very important to purchase original oil products through formal channels!

Oil viscosity should be appropriate


If the viscosity is too high, it will "roll over"

Forklift drivers will find that the oil pressure of the forklift truck is always low in summer. In order to "pull back" the value of the oil pressure gauge, many masters will replace the lubricating oil with extremely high viscosity; but the value of the oil pressure gauge increases, the forklift truck But there was a problem, and the power seemed to be more and more "weak".


That is because the blind pursuit of high-viscosity lubricating oil will increase the surface friction of engine parts, resulting in increased fuel consumption and energy waste. Moreover, when the viscosity of the lubricating oil is too high, its flow speed will be relatively slow, causing the engine to overheat, and the oil film cannot be formed between the engine parts in time, causing wear and tear to the engine.

The viscosity of lubricating oil will decrease with the increase of temperature. In summer, lubricating oil with a slightly higher viscosity grade can be appropriately selected to maintain the viscosity, but the misunderstanding of "the higher the viscosity is, the better" should be avoided. Under the condition of ensuring sufficient lubrication, the lubricating oil with the corresponding viscosity should be selected according to the temperature range, engine temperature and actual vehicle conditions during use.

Essential antifreeze for summer


Replacing with water will "roll over"


Many forklift drivers think that it is only necessary to add antifreeze in winter, and it is enough to add some tap water to the forklift in summer.


Water is somewhat corrosive and prone to scale, but antifreeze contains anti-corrosion and anti-rust additives, and the cooling system plays a protective role. Compared with the boiling point of water is only 100 ℃, the boiling point of antifreeze is above 120 ℃, the use of antifreeze can prevent the forklift from "boiling" in summer.

Good quality antifreeze not only has strong low temperature resistance, but also has good high temperature resistance and anti-corrosion, rust removal and other functions. It is absolutely not advisable to use water instead of antifreeze!

The oil replacement cycle is different for different models and under different working conditions, and the maintenance cycle should be determined by referring to the maintenance instructions of the specific forklift model.

Only use original high-quality oil to ensure the stable performance of the forklift.


Hot Tags: 2ton telescopic forklift, China, manufacturers, factory, customized

Send Inquiry

whatsapp

skype

E-mail

Inquiry