SOCMA HNE360C-EP Grid Power Crawler Excavator

Warranty Rules for Parts (Assembly) of Excavator of SOCMA Charging equipment and charging problems We can help customers to select charging piles , install and debug charging equipment The charging pile has no other special requirements and the charging pile only needs to meet the national...

Send Inquiry

Product Introduction

Warranty Rules for Parts (Assembly) of Excavator of SOCMA

Warranty period	SN	Parts & assemblies	Warranty rules	No "warranty" condition
Half year or 1200 working hours	46	Lower frame assembly	Due to manufacturing reasons: cracking or deformation of key parts affecting service performance	Improper use, deformation or crack caused by external force collision
	47	Left and right rocker	Fracture due to manufacturing	Because the worn bushing is not replaced in time, the assembly hole diameter increases
	48	Tank	Due to manufacturing reasons: Oil leakage, not working properly	Improper use, caused by external force collision
	49	Bucket assembly	Due to manufacturing reasons: cracking or deformation of key parts affecting service performance	1. Improper use, caused by external force collision 2. Failure to carry out compulsory maintenance according to regulations will cause damage 3. Normally worn
	50	Outrigger assembly (if configured)	Due to manufacturing reasons: cracking or deformation of key parts affecting service performance	1. Improper use, caused by external force collision 2. Failure to carry out compulsory maintenance according to regulations will cause damage 3. Normally worn

Description		Unit	HNE360C-EP
Basic parameters	Standard bucket capacity	m³	1.6
Basic parameters	Operating Weight	t	35
System Operating Pressure	Implement Circuits	MPa	34.3
	Swing Circuits	MPa	26
	Travel Circuits	MPa	34.3
	Maximum Rated Flow of main pumps	L/min	2×280
Working range Parameters	Average Ground Pressure	Kpa	62.8
	Boom	mm	6470
	Arm	mm	2800(Standard)
	Maximum Digging Radius	mm	10700
	Maximum Digging Depth	mm	6980
	Maximum Vertical digging depth	mm	5860
	Maximum Digging height	mm	9840
	Maximum Dumping Height	mm	6810
Performance parameters of the whole machine	Max excavating force(arm/bucket)	kN	196/231
	Travel Speed(high/low)	km/h	5.0/3.0
	Grading capacity	°/%	35°/70%
	Max.traction	kN	267
	Noises at driver location	dB(A)	77
Overall dimensions	Overall lenth	mm	11320
	Overall width	mm	3340
	Overall height	mm	3580
	Shoe width	mm	600
	Minimum Foreside Swing Radius	mm	4450
	Minimum Tail Swing Radius	mm	3500
	Hydraulic Oil Filling Capacity/Hydraulic Oil Tank Capacity	L	250/390
High voltage management unit (Grid input)	Rated power	kW	180
High voltage management unit (Grid input)	Peak power	kW	240
Motor system	Rated power	kW	188
	Rated torque	Nm	1000
	Rated speed	rpm	1800
	Rated frequency	Hz	180
	Rated voltage	V	380
	Rated current	A	362
Note: Due to technological improvements, the above data are subject to change without prior notice.

Charging equipment and charging problems

We can help customers to select charging piles , install and debug charging equipment

The charging pile has no other special requirements and the charging pile only needs to meet the national standard GB/T 27930charging communication protocol: GB/T 27930.

Calculation of charging time: Maximum charging time = rated battery storage energy/power of charging pile

At present, the power grade of quick charging pile suitable for electric construction machinery mainly includes: 60KW, 80KW, 90KW, 120KW, 160KW, 180KW and 240KW;

Battery management system auxiliary power compatible with 12V/24V, China's charging pile generally three-phase power 380V input, except in other regions and countries, 450V-750V output to charge the battery, charging current is the battery required current or charging pile can supply the maximum current;

Low-power portable or 220V DC charging piles (generally less than 30kW) can also be selected for slow charging. The charging time is longer. At present, after changing to liquid-cooled batteries, slow charging is relatively inefficient;

Air switch current specification required for charging pile installation (except other regions and countries): Air switch rated current (A) ≥ charging pile power (kW)*1000/(1.732* 380V*0.85)

Cable specifications required for the installation of charging piles (except for other regions and countries): the required current of the cable (A) ≥ charging pile power (kW)*1000/(3*220V*0.85)

Hot Tags: socma hne360c-ep grid power crawler excavator, China, manufacturers, factory, customized

45 Ton Reach Stacker

SOCMA HNE250C-EP Grid Power Crawler Excavator