SOCMA 16T Crane Forklift 25T Crane
SOCMA Forklift Crane 16Ton/25Ton
HNFC160-1000 crane forklift is a kind of compound innovation products which is developed by SOCMA.
The rated load is 16 ton, Max. lifting Moment of folding crane is 25 ton 4 m, The folding crane can be rotated at 360 degree.
1. Engine
(1)Adopt Cummins or Yuchai turbocharger diesel engine with strong power, energy-saving and environmental friendly, A can satisfy high efficiency operation requirements.
(2) The layout of cooling radiator system is at right side, hydraulic motor controlling with hydraulic fan and hydraulic oil fan. This can ensure the heat balance of whole machine.
2. Transmission
(1)Adopt Zhongnan transmission hydraulic gear box, CVT, big joint working condition traction, Reliable double variables system.
(2)Neutral start-up device is installed on transmission controlling valve, this makes start-up of whole machine more safer.
3. Driving Axle
(1) Front axle adopts heavy duty forklift driving axle, spiral bevel gear and Wheel rim planetary gear deceleration and increasing torsion. It is big load capacity and long life span. Six heavy duty caliper disc brake, postpositional gas storage can,
(2) Rear axle adopt horizontal hydraulic cylinder type power steering structure, tight steering structure and this can reduce the steering resistance and damage of tyres, can improve the ride during the drive.
4. Hydraulic system
(1) Full Hydraulic load sensor steering system, small rear axle turning radius and more flexible steering.
(2) Adopt double pump interflow working hydraulic system and it can lower oil and energy consumption.
(3)Two sets of independent hydraulic system support two different working devices , shift valve control can separate the flow or combine the flow, trigger can stretch out and draw back for free and it can be adapted to different working conditions.
(4) One handle can realize three sets working movement of forklift due to the pilot control, it can reduce hydraulic controlling pipe and can enlarge the space of cab.
(5) Rotating part of folding crane is controlled by double rotary motor, which makes the rotation more smooth and improve the brake efficiency of motor.
(6) Hydraulic system install the oil-return radiator and back press protection device to ensure heat balance of whole machine.
5. Mast
(1)Forklift Attachments are installed at front mast, folding crane is installed at the back of vehicle, folding crane is used for hanging the cargos and it has folding and telescopic function, which is convenient for travelling.
(2)Adopt Integrated frame ,five out-triggers are arranged at the front and rear of whole vehicle frame to ensure balance of whole machine.
(3)Falling of mast adopt speed limit valve and press selection valve to reduce the compact of hydraulic system, it can decline the mast from top to the group when the engine flameout.
(4) Inner and outside mast adopt rolling wheel match, movement wheel force saving structure and the mask has long life and high reliability.
(5) Cab is arranged at left side, the top height of crane after folding is not higher than mast forklift. It can lower the overall height of the vehicle, more stable and better traffic performance.
(6)High type, low type, standard mast, various attachments can be customized according to customer's requirements.
6.Fork carrier
(1) Adopt quick-changing cargo loader, more shortcut.
(2)hydraulic distance-adjust cargo fork and it is convenient for adjustment.
(3)Cascade high strengthened fork, higher strength, more durable and higher life span.
7. Tyres Choose the bulk type depth heavy duty forklift tyre, rear steering axle can swing around the centre and has perfect traction and traffic performance.
8. Cab
(1) Adopt adjustable steering, aviation seat, more comfortable, automatic operation and flexible.
(2)Adopt domestic high quality electronic components, maintenance-free battery, the wire adopts burning-resistance material, more durable. The optional parts include: fan, radio, cold and heat A/C, reversing displaying, Weighing machine.
(3) Be with folding crane remote controller and wireless reception module. Folding Crane "Rotation, Folding, lifting, Expansion and Contracting" are controlled by remote wireless technology. The Driver can operate it at any position on the crane forklift. It is safe and reliable.
(4)Using the torque limiter, it would automatic alarm when the operation of the arm beyond the working range , and automatic restriction of dangerous action, more safe operation.
|
POS |
ITEM DESCRIPTION |
UNIT |
HNFC160-1000 |
|
|
Characteristics |
1.1 |
Capacity |
Q(t) |
16 |
|
1.2 |
Load center |
c(mm) |
900 |
|
|
1.4 |
Wheel base |
y(mm) |
3900 |
|
|
Weight |
2.1 |
Truck Weight |
kg |
28300 |
|
Chassis |
3.1 |
Tyre Specs.: Front |
12.00x24/18PR |
|
|
3.2 |
Tyre Specs.: Rear |
12.00x20/18PR |
||
|
3.3 |
Tyres Qty, front/rear (X-drive wheels) |
4×/2 |
||
|
3.4 |
Wheel tread: Front |
b10(mm) |
2060 |
|
|
3.5 |
Wheel tread: Rear |
b11(mm) |
2330 |
|
|
Dimension |
4.1 |
Mast/carriage tilt angle(front/rear) |
° |
6°/12° |
|
4.2 |
Mast height(fork lowering) |
mm |
3625 |
|
|
4.3 |
Max. lifting height |
h3(mm) |
3500 |
|
|
4.4 |
Overall height(fork raised) |
h4(mm) |
5375 |
|
|
4.5 |
Overall length (with 1800mm forks) |
l1(mm) |
8370 |
|
|
4.6 |
Fork front vertical surface to the rear end of the vehicle |
l2(mm) |
6570 |
|
|
4.7 |
Overall Width |
b1/b2(mm) |
2750 |
|
|
4.8 |
Fork dimension |
s/e/l(mm) |
110x220x1800 |
|
|
4.9 |
Fork carriage width |
b3(mm) |
2750 |
|
|
4.10 |
Mast Min ground clearance (with load) |
m1(mm) |
265 |
|
|
4.11 |
Outrigger min ground clearance(with load) |
m2(mm) |
450 |
|
|
4.12 |
Min.Turning radius |
Wa(mm) |
7300 |
|
|
Performance |
5.1 |
Travel speed (with load/without load) |
km/h |
23/26 |
|
5.2 |
Max.lifting speed (with load/without load) |
m/s |
270/300 |
|
|
5.3 |
Gradeablity (with load/without load) |
% |
15/20 |
|
|
5.4 |
Driving brake |
clamp disco brake |
||
|
Engine |
7.1 |
Engine brand/model |
YC6J175-T302 |
|
|
7.2 |
Power |
KW |
129 |
|
|
7.3 |
Rotate speed |
rpm |
2200 |
|
|
7.4 |
Air cylinder |
cm3 |
6 |
|
|
Other |
8.1 |
Driving control method |
torque converter |
|
|
Jib |
9.1 |
Weight |
Kg |
17700 |
|
9.2 |
Control |
Remote control |
||
|
9.3 |
Outrigger Control |
Manual landing valve control |
||
|
9.4 |
main Outrigger Longitudinal span |
mm |
6276 |
|
|
9.5 |
Distance between extending rear outrigger to center of swing platform |
mm |
1538 |
|
|
9.6 |
Distance between the center of additional extended outrigger at two sides |
mm |
4178 |
|
|
9.7 |
Max. lifting height |
mm |
17300 |
|
|
9.8 |
Additional leg extension/retraction speed (idle speed) |
S |
31/18 |
|
|
9.9 |
Main leg extension/retraction speed (idle speed) |
S |
45/24 |
|
|
9.10 |
Rear leg extension/retraction speed (idle speed) |
S |
16/8 |
|
|
9.11 |
Additional leg support / retraction speed (idle speed) |
S |
216/112 |
|
|
9.12 |
Main leg support / retraction speed (idle speed) |
S |
237/128 |
|
|
9.13 |
Rear leg support / retraction speed (idle speed) |
S |
38/20 |
|
|
9.14 |
Hook lifting/lowering (low speed) |
S |
W/Hook Fixed |
|
|
9.15 |
Hook lifting/lowering (high speed) |
S |
W/Hook Fixed |
|
|
9.16 |
Boom lifting/lowering (low speed) |
S |
87/45 |
|
|
9.17 |
Boom lifting/lowering (high speed) |
S |
63/37 |
|
|
9.18 |
Turn left/turn right (low speed) |
S |
132/132 |
|
|
9.19 |
Turn left/turn right (high speed) |
S |
108/108 |
|
|
9.20 |
Arm extension/retraction (low speed) |
S |
235/126 |
|
|
9.21 |
Arm extension /retraction (high speed) |
S |
278/145 |
|
Hot Tags: socma 16t crane forklift 25t crane, China, manufacturers, factory, customized
Previous
4 Ton 17Meter TelehandlerNext
Machine ForkliftYou Might Also Like
Send Inquiry