11 Ton Telehandler
HNT-110 telescopic forklift
HNT-110 telescopic forklift is front-wheel drive, rear-wheel steering, rigid suspension; adopt hydro-mechanical transmission with two-speed forward and two-speed reverse, full hydraulic power steering, and air-over-oil type drum brake; the working device is composed of the three-stage quadrilateral telescopic boom and boom quick change device and hook. this telescopic forklift is not only applicable to lift the stone slabs in containers, but also can be used as a general crane, can be widely used in factory, dock, freight yard, forest farm, construction material, warehouse, logistics etc industries. it is a loading and unloading machine with wide adaptability and high efficiency.
Product description of 11 Ton Telehandler
1.Using well-known brand diesel engine, with National III emissions, strong power, energy saving and environment protection, to meet the requirements of efficient operations
2.Double turbo hydraulic torque converter, stepless speed change. Single-lever control transmission system, with 2 speeds for forward and reverse gears, easier to operate
3.Use dual-pump combined hydraulic system, greatly reduce the fuel consumption and energy consumption
4.With full hydraulic coaxial flow amplification steering system, turning radius for rear steering axle is small, steering light and flexible
5.Using front wheel drive, rigid suspention, rear axle steering structure, can achieve four-wheel drive. Front axle spiral bevel gear and wheel side planetary wheel to reduce the speed and increase torque, have excellent load capacity
HNT-110 Telescopic forklift specification
Item | Specification | Remarks |
Rated load (kg) | 11000 | In main hook |
Operating weight(kg) | 13000 | |
Max. Lifting height of the main hook (mm) | 7605 | Distance from the main hook to the ground |
Max. lifting height of the complete arm (mm) | 10300 | Front point hoist |
Wheel base (mm) | 2988 | |
Front tread (mm) | 1638 | |
Rear tread (mm) | 1785 | |
Min. groud clearance (mm) | 310 | |
Overall length (mm) | 5288 | Without hook |
Overall width (mm) | 2310 | |
Overall height (mm) | 2715 | |
Height of the cab (mm) | 2400 | |
Length of rear overhang (mm) | 1055 | |
Max. outreach of the main hook (mm) | 4800 | Horizontal direction |
Max. outreach of the complete arm (mm) | 7900 | Horizontal direction |
Tipping angle of hook, up/down (°) | 22°/24° | |
Tipping angle of big arm, up/down (°) | 14°/43° | |
Min. turning radius (mm) | 6800 | |
Max. gradeability (°) | ≥20% | |
Max. travelling speed (Km/h) | 25 | |
Front tyre | 11.00-20 | |
Rear tyre | 9.00-20 | |
If with fork, then the load capacity will be 5t |
HNT-110 Telescopic forklift performance parameters
Item | HNT50-2 | Remark |
Rated lifting capacity, kg | ≤5000 | |
Dead weight, kg | 13000 | |
Max.lifting height, mm | 7050 | the height of fork upper surface to ground |
Wheelbase, mm | 2988 | |
Front wheel tread, mm | 1638 | |
Front wheel tread, mm | 1785 | |
Min.ground clearance, mm | 310 | |
Overall length, mm | 6230 | include fork |
Overall width, mm | 2350 | |
Overall height, mm | 2715 | |
Inner height of the cab | 2420 | |
Rear overhang length,mm | 1055 | |
Max.reach distance, mm | 5100 | horizontal direction |
Tilt angle of basic boom up/down | 14°/43° | |
Min.turning radius,mm | 6800 | |
Max.Gradeability | ≥20% | |
Max.travelling speed, Km/h | 25 | |
Front wheel | 11.00-20 | |
Rear wheel | 9.00-20 | |
Engine Model | Dongfeng CUMMINS 4BT3.9-C100 | |
Rated power, KW | 75 | |
Rated speed, R/M | 2200 |
HNT-110 Telescopic forklift configuration list
Serial No. | Item | Model | Manufacturer | |
1 | Engine | QSB3.9-C100 | Cummins(national III) | |
2 | Frame | / | SOCMA | |
3 | Pump | Hefei Changyuan | CBHY-G36/F4.5-ATφR | |
4 | Axle | Front | Xuzhou | 07BTJ0000 |
Rear | SOCMA | |||
5 | Transmission | Zhongnan transmission | YQXD100K.970 | |
6 | Multi-way valve | Linhai | CDB-F20HZT-03C | |
7 | Steering gear | Zhenjiang hydrualic | BZZ1-E200 | |
HNT-110 Telescopic Crane loader | ||
Item | Parameter | Remark |
Rated load，kg | ≤11000 | |
Operating weight kg | 13000 | |
Main hook max. lifting height ，mm | 7605 | from main hook to the ground） |
Max. lifting height with full extended boom，mm | 10300 | （front hook） |
Wheel base，mm | 2988 | |
Front wheel tread，mm | 1638 | |
Rear wheel tread，mm | 1785 | |
Min. ground clearance，mm | 310 | |
Overall length ，mm | 5288 | without arm |
Overall width, mm | 2350 | |
Overall height，mm | 2715 | |
Overall height，mm | 2400 | |
Rear overhang length，mm | 1055 | |
Main hook max. horizontal reach，mm | 4800 | （Horizontal ） |
Max. horizontal reach，mm | 7900 | （Horizontal） |
Arm turnning angle up/down (°) | 22°/24° | |
Boom turnning angle up/down(°) | 14°/43° | |
Min. turning radius, mm | 6800 | |
Max. grade abiltiy，(°) | ≥20% | |
Max. travelling speed，Km/h | 25 | |
Front wheel | 11.00-20 | |
Rear wheel | 9.00-20 | |
Configuation | ||||
Serial No. | Name | Model | Manufacturer | |
1 | Engine | 4BT3.9-C100（75KW，2200） | DCEC Cummins | |
2 | Chassis | / | SOCMA | |
4 | Motor | / | ||
5 | Pump | Hefei Changyuan | ||
6 | Driving axle | Front | Xuzhou | |
Rear | SOCMA | |||
7 | Transmission | ZHONGNAN | ||
8 | Multi-way valve | LINGHAI | ||
9 | Working oil pump | Hefei Changyuan | ||
10 | Steering gear | Zhenjiang hydraulic | ||
Hot Tags: 11 ton telehandler, China, manufacturers, factory, customized
Previous
4 Ton Rotated TelehandlerYou Might Also Like
Send Inquiry