1.8tons 1.8t Electric Fork Reach Truck

1.8tons 1.8t Electric Fork Reach Truck
Rated load: 1.8tons
Fork reach
Scissor type reach truck

Email: claire@socmachinery.com

(1) When using a reach forklift, special attention should be paid to timely charging of the battery and correct maintenance of the battery. Pay attention to the method when charging the battery, so that the battery can be fully charged without overcharging the battery.
(2) When operating a reach forklift, try to avoid long-term acceleration over long distances. When the vehicle starts and the speed increases, hold the accelerator pedal steady. If the road conditions are good, the vehicle will continue to accelerate. When the vehicle needs to slow down, relax the accelerator pedal and tap the brake pedal lightly. This can make full use of the energy of deceleration. If the vehicle has a regenerative braking function, the kinetic energy during deceleration can be recovered. When the vehicle is going down a slope, do not disconnect the circuit of the drive motor and gently press the brake pedal to allow the vehicle to run in a regenerative braking state, using the vehicle's downward kinetic energy to reduce battery energy consumption.
(3) When the vehicle is running, do not mistake the "forward or reverse" direction switch for the steering switch. Unless you need to decelerate urgently, do not depress the brake pedal directly to the bottom. During the use of the vehicle, when the battery power is found to be insufficient (which can be obtained through the power meter, power supply indicator light and other alarm devices), the battery should be charged as soon as possible to prevent excessive discharge of the battery.

Hot Tags: 1.8tons 1.8t electric fork reach truck, China, manufacturers, factory, customized