25 Ton Heavy Duty Forklift same as HYSTER KALMAR Machine
video

25 Ton Heavy Duty Forklift same as HYSTER KALMAR Machine

25 ton heavy duty forklift
Weichai/Cummins engine
1250mm load center
can be suitable for container handling and stack
Send Inquiry
Product Introduction

1

2

25-ton forklift operation and Safety:

1. Wide operating space.

2. Directional column that can be adjusted at a large Angle according to the driver's needs.

3. The design of the joystick position is more in line with ergonomic principles, which can reduce driver fatigue.

4. The instrument layout is reasonable so that the driver can observe the running state of the car at a glance.

5. Large pedal contact surface, super long safety frame handrail, the unique design of lower handrail, so that the operator is very easy to get on and off the car.

6. Unique side handrail design, so that the driver has a sense of security when reversing.

7. Large, comfortable cushioned seats.

8. Large arc reverse mirror surface, wide field of vision.

9. Wide view frame improves operation efficiency.

10. The position of the emergency power-off switch is close to the driver so that the driver can cut off the power supply in a short time.

1. Balanced heavy internal combustion forklift truck

The general use of diesel, gasoline, liquefied petroleum gas fuel, load capacity of 2.5 tons -45 tons, more than 10 tons for diesel forklift.

2. Container forklift (front lift)

Using diesel engine as the power is used for loading and unloading containers of a crane. The carrying capacity is 45 tons.

3. Side lift truck

The characteristics of

It has the ability to pick up goods directly from the side fork, so it is mainly used to pick up long goods, such as wood, steel bar and so on.

Balanced heavy diesel forklift, large volume, but its stability is good, suitable for heavy load, unlimited use time, the use site is generally outdoors.

Compared with gasoline engines, diesel engines have better power performance (low speed is not easy to stall, overload capacity, long time operation ability) and low fuel cost. But vibration, noise, large displacement, since the major, high price, load weight can be from 0.5 tons to 45 tons.

2. Balanced heavy gasoline forklift truck, large volume, but its stability is good, suitable for heavy load, unlimited use time generally outdoor. The gasoline engine is small in shape, light in weight, large in output power, low in noise and vibration, and low in price. But gasoline engine overload capacity, long time operation capacity is poor, fuel costs are quite high. Load weight from 0.5 tons to 4.5 tons.

3. LPG forklift truck (LPG for short) is an LPG forklift truck equipped with an LPG conversion device. It can switch between using gasoline and LPG through a conversion switch. LPG forklift truck has the advantages of good exhaust emissions, carbon monoxide (CO) emissions are significantly less than gasoline engines, low fuel costs (15KG of liquefied gas is equivalent to 20 liters of gasoline), suitable for indoor operations with high environmental requirements.


ConfigurationModelUnitCPCD250
Vehicle configurationHNF-250
CharacterRated   Capacityt25
Load Centermm1250
Wheelbasemm4400
WeightOperation   Weightkg35000
ChassisTyre,   front
14.00-24-28PR
Tyre, rear
14.00-24-28PR
Tyres Qty. front/rear (x=driving wheel)
4×/2
Wheel tread, frontmm2200
Wheel tread, rearmm2390
Basic dimensionMast/Carriage   Tilt Angle (front/rear)°6/12
Mast height (fork lowered)mm3860
Mast lifting heightmm3500
Max. lifting heightmm5610
Height to head guard (height to cab)mm3510
Overall length (with fork)mm9190
Fork front vertical surface to the rear end of   the vehiclemm6745
Overall widthmm3050
Fork dimensionmm2000x260x100
Fork carrier widthmm3050
Mast Min. ground clearance, full loadedmm300
Wheelbase center Min. ground clearancemm420
Min. turning radiusmm6700
ParameterTravel   speed (full loaded/without load)km/h25/29
Max. lifting speed (full loaded/without load)mm/s260/270
Max. lowering speed (full load/without load)mm/s315/260
TractionkN170
Gradeability (full loaded/without load)%20/21
Driving brake
Hydraulic   clamp disc
EngineBrand 
Weichai
WP10G220E343
Rated rotor speedmin-12200
No. of Cylinder
6
Transmission   gears (Front/rear)
2/1
Attachments   working pressureMpa18
Attachments   using oil amountL/min80


3


4

5

6

7

8


9

 10



Hot Tags: 25 Ton Heavy Duty Forklift same as HYSTER KALMAR Machine, China, manufacturers, factory, customized

Send Inquiry

whatsapp

skype

E-mail

Inquiry