Fujian Southchina Heavy Machinery Manufacture Co.,Ltd

Catalogue

Contact US

Address: Road, Taiwanese Investment Area, Quanzhou, Fujian, China

MOB: +86 18859225922

FAX: +86-592-5650876

Email: john@socmachinery.com

          jackson@socmachinery.com

         sunny@socmachinery.com

Website: www.socma-forklift.com


35T Heavy Duty Forklift For Heavy Cargo Transport

35T Heavy Duty Forklift For Heavy Cargo Transport

35T Heavy Duty Diesel Forklift
Engine: Cummins
Transmission: Electric type
Load Center: 1250mm
Fork length: 2440mm
Lifting height: 3500mm
Mast type: duplex wide view mast
With full cabin and AC
With sideshifter and fork positioner

Chat Now

    35T Heavy Duty Forklift For Heavy Cargo Transport


    Strong points of SOCMA 35tons Diesel Forklift: 

    1, The thermal balance temperature of the engine and transmission is good: The engine water thermal balance temperature will keep 105℃ below, transmission oil thermal balance temperature will keep 90℃ under the environmental working temperature of 40℃, which can solve the problem of oil-leakage, water-leakage causing by aging of seal, and other failure such as engine early wearing, power transmission failure. 


    2, Optimized mast design, with wide view: Optimized mast with small clearance, compact structure, which provide wide front view for the operator. It is good for safe-working improvement and the increasing of the work efficiency. 


    3, Good cost effectiveness and stable performance: China Domestic configuration with the same performance of imported configuration, with good feedback after launching into the market 


    Main specifications for 35t forklift

    Configuration

    Model

    Unit

    CPCD350

    Vehicle configuration

    HNF-350

    Performance

    Rated load


    35000

    Load center


    1250

    Mast tilt angle (front/rear)

    º

    6/12

    Overall dimensions

    Length

    mm

    9700

    Width

    mm

    3320

    Height

    mm

    4010

    Mast lifting height

    mm

    3500

    Fork size (L*W*H)

    mm

    2440X340X125

    Min. turning radius

    mm

    7260

    Max. travel speed (with load)

    Km/h

    25

    Lifting speed (with load)

    mm/s

    260

    Gradeability (with load)

    %

    20

    Weight

    Kg

    43000

    Tyre

    Front


    4X16.00-25/32PR

    Rear


    2X16.00-25/32PR

    Wheel tread

    Front

    mm

    2400

    Rear

    mm

    2450

    Wheelbase

    mm

    4800

    Min. ground clearance

    mm

    400

    DF Cummins Engine

    Model


    6CTA8.3-C260

    Rated power/rotate speed

    KW/r.pm

    194/2200



    8.3L


    Scheduled maintenance regarding 35t heavy duty forklift

    Each working 8 hours-35t counter balanced forklit

    ● Visual check around the machine if is unusual ,oil spills.

    ● Check the engine oil level、hydraulic oil level、transmission oil level、brake fluid and radiator

    antifreezing solution(water).

    ● Check pin shaft sleever and rotating parts with lubricating grease.

    ● Check the lighting and instrumentation.

    ● Check the tire pressure and damage condition.


    Each working 50 hours or one week-35 tons forklift

    ● Tighten front and rear drive shaft coupling bolts.

    ● Check the gearbox oil level.

    ● Check the brake stroke gap.

    ● Check the emergency and parking brake, if improper should adjust.

    ● Check the tire pressure and damage condition.

    ● Inject butter.in mast hinge joint ,shafts, chains, and other bearing pressure.


    Each working 125 hours or half month-SOCMA heavy duty forklift

    ● Clean the engine cylinder head and torque converter oil cooler.

    ● Check the battery level, the joints coated with thin layer of Vaseline.

    ● Check the hydraulic oil tank.


    Each working 250 hours or one month-35t cargo lifter

    ● Check tightening torque of the rim fixed bolts.

    ● Check the oil level front and rear the bridge.

    ● Check the weld line and bolt of mast device, frame, rim if crack, loose.

    ● Replace engine oil (according to oil quality and engine usage conditions).

    ● Check the engine fan belts, compressors and generators belt if tightness, damage.

    ● Adjust the foot brake and parking brake.

    ● Drain the water tank.


    Each working 600 hours or three months-35t heavy cargo forklift

    ● Check the transmission fluid if is clean, clean oil filter, change new oil and clean the transmission

    back shell.

    ● Tighten front and rear axles and the frame bolts.

    ● Engine oil must be replaced, replace the oil filter.

    ● Check the engine valve clearance.

    ● Clean oil filter of diesel fuel tank refuel and oil absorption.

    ● Clean oil filter of the hydraulic tank refuel, return oil and oil absorption.


    Each working 1200 hours or half year-35t diesel forklfit

    ● Replace the transmission hydraulic transmission oil, cleaning oil filter, oil pan.

    ● Replace the engine fuel filter.

    ● Check the variety of thermometers, pressure gauges.

    ● Check fastening condition of the engine intake and exhaust pipe.

    ● Check the operation case of the engine.

    ● Replace the hydraulic oil, clean the fuel tank strainer, suction tube.

    ● Replace the front and rear axle gear oil.


    Each working 2000 hours or one year

    ● Check the foot brake and parking brake, if necessary, disassemble, check wear condition of

    friction plate.

    ● Check the brake booster seal, spring components, replacement of brake fluid, check brake

    sensitivity.

    ●By measuring t natural subsidence of cylinder, check the distribution valve, the working cylinder

    seal.

    ● Check the steering system flexibility.


    Pictures of SOCMA 35t diesel forklift:

    35t forklift

    35t heavy duty forklift

    forklift for heavy cargo handlingdiesel forklift35t forklift with 5500mm lifting

    steering wheel for forklift

Hot Tags: 35t heavy duty forklift for heavy cargo transport, China, manufacturers, factory, customized
Related Products
Inquiry