Fujian Southchina Heavy Machinery Manufacture Co.,Ltd

Catalogue

Contact US

Address: Road, Taiwanese Investment Area, Quanzhou, Fujian, China

MOB: +86 18859225922

FAX: +86-592-5650876

Email: john@socmachinery.com

          jackson@socmachinery.com

         sunny@socmachinery.com

Website: www.socma-forklift.com

Wheel Excavator 8 Ton

Wheel Excavator 8 Ton

SOCMA wheel excavator 8 ton, is highly-flexible, working either on-road or off-road.
To provides versatility, allowing you to switch between the attachments you need.
Travel at high speeds in the comfort of your cab.
The fuel-efficient engine and well-matched components deliver top power and low-emissions for environmental care.

Chat Now

    SOCMA  WHEEL EXCAVATORS


    SUPERIOR PERFORMANCE AND STABILITY

    Wheel excavator 8 ton

    SOCMA 8 ton wheel excavator is highly-flexible, working either on-road or off-road. The machine provides versatility,allowing you to switch between the attachments you need. Travel at high speeds in the comfort of your cab. The  fuel-efficient engine and well-matched components deliver top power and low-emissions for environmental care.

     All SOCMA wheeled excavators are easy to transport, offer better digging reach, and provide 360° swing for superior maneuverability and positioning over backhoes.Rethink your fleet with the most complete lineup in the industry.

    8 ton wheel excavator factory

     




     

    5 REASONS TO CONSIDER WHEELED EXCAVATORS

    Wheeled excavators have been staples in construction fleets for decades.

    1. You’re not sacrificing performance
    A common misconception about wheeled excavators is that you lose the stability of a crawler. That is simply not the case. With outriggers, a wheeled excavator is every bit as stable as a comparable crawler — and you won’t be sacrificing on power, breakout/tearout forces, reach or digging depth, either.

    8 ton wheel excavator

    2. They’re not just for roadside work
    Wheeled excavators are great for roadside work due to their mobility and versatility. Not only can the short-swing modelswork in narrow lanes for less traffic disturbance, but they’re able to easily transition from placing concrete barriers to digging after a quick attachment swap. But wheeled excavators can do so much more than just roadside work. Swap out an outrigger for a dozer blade, add a tilt rotator, and you have an incredibly versatile and mobile machine for utility installation. Outfit the machine with a hydraulically elevating cab and a grab arm with grapple for a mobile material handler. Add a guarding package and ventilation system, and it’s the perfect machine for waste handling. Add solid tires and a rotation grapple, and you can travel around a scrap yard with enough finesse to dismantle a car, component by component. Switch from a one-piece to two-piece boom for extra lift capacity in tight quarters. For added benefit, a short-swing wheeled excavator can turn within one lane of traffic. With this level of versatility, replacing a backhoe with a wheeled excavator starts to become a no-brainer for many applications.

    8 ton wheel excavator

    3. You’ll save on labor and cleanup
    With a top speed approximately 20 mph, you can avoid having to use a lowboy and a CDL for around-town work. Outfit the trailer with overrun brakes, and you can haul up to an 8.5-ton trailer with all your supporting tools and attachments. That saves time and labor. Wheeled excavators leave less disturbance on asphalt, which means less time and money spent on cleanup.

    8 ton wheel excavator



    4. You’ll spend less time repositioning
    Tilt rotators, such as the Steelwrist available on wheeled excavators, can drastically improve productivity. Not only do they allow for 360-degree rotation of the attachment, but also 45-degree tilt from the left or right sides. The Steelwrist also has a claw on the back — essentially a two-finger grapple — that makes it great for utility work. Imagine replacing a section of pipe. Simply park your machine in a stationary position and adjust the bucket angle to get the top, sides, and bottom of the pipe, and then rotate it 180 degrees, open the claw, grab the pipe, pull it out of the ground, use that same claw to lower in the replacement pipe, and the bucket can be rotated 180 degrees to start filling in the materials — all without repositioning the machine a single time.


    8 ton wheel excavator



    5. You can expect more from SOCMA
    There are a number of differentiators you can expect from SOCMA. First, the Smart View feature, which provides 360-degree aerial visibility of the machine’s surroundings from inside the cab. Secondly, wheeled excavators are now covered under the Lifetime Frame and Structure Warranty, which covers the boom and arm for the entirety of the initial period of ownership. Lastly, SOCMA is undergoing a significant wheeled excavator lineup expansion.


    8 ton wheel excavator specifications and parameters


    Working ranges

     Boom length

    3500mm

     Arm length

    1900mm

     Max. Digging depth

    3700mm

     Max. Digging height

    6400mm

     Max. Dumping height

    4830mm

     Min. Swing radius

    2230mm

     Rear tail swing radius

    1800mm

     Performance

     Operating weight

    7500KG( with blade, out trigger)

     Engine Rated power  (Model XINCHAI A498BPG-515)

    55KW

     Bucket capacity

    0.22m³

     Hydraulic system working pressure

    22Mpa

     Swing speed

    11.5r/min

     Traveling speed

    32Km/h

     Bucket digging force

    45KN

     Arm crowd force

    28KN

     Max. Grade ability

    30°

     Ground pressure

    49Kpa

     Dimension

     Overall length

    5800mm

     Overall width

    2120mm

     Overall height

    2850mm

     Min. Ground clearance

    220mm

     Wheel base

    2450mm


     8 ton wheel excavator

     More information please contact  john@socmachinery.com


    John Su
    SOCMA GROUP

    Fujian Southchina Heavy Machinery Manufacture Co.,Ltd

      

    Tel: +86 592 5650835
    Fax: +86 592 5650876
    Mobile:0086 13606085590
    Email: john@socmachinery.com     
    Website:

    www.socmachinery.com

    www.socma-forklift.com


Hot Tags: wheel excavator 8 ton, China, manufacturers, factory, customized
Related Products
Inquiry