Fujian Southchina Heavy Machinery Manufacture Co.,Ltd

Catalogue

Contact US

Address: Road, Taiwanese Investment Area, Quanzhou, Fujian, China

MOB: +86 18859225922

FAX: +86-592-5650876

Email: john@socmachinery.com

          jackson@socmachinery.com

         sunny@socmachinery.com

Website: www.socma-forklift.com

Home > Knowledge > Content
How to maintain of 40 ton forklift?
- Aug 24, 2018 -

Notes for use of40 ton forklift:

Heavy duty forklift manufacturing is located in the world's largest and most promising market with certain development potential. Meanwhile, a series of derivative industries, such as forklift maintenance industry, have also become an indispensable new industry.so the maintenance and maintenance can be divided into first - class forklift maintenance and second - class forklift maintenance.

Then the following primary maintenance can be added to the routine maintenance project.

1. Check whether the economizer is working normally.

2. Check whether the transmission shift work is normal.

3. Check the degree of fan belt tightness.

4. Check whether the filter net of diesel oil inlet is blocked and damaged, and clean or replace the filter net.

5. Check and adjust the valve clearance.

6. Check and adjust the gap between brake plate and brake drum of hand and foot brakes.

7. Check whether the generator and starting motor are installed firmly, clean and firm with the connector, and check whether the carbon brush and commutator are worn.

8. Replace the oil in the oil sump, check whether the crankcase ventilation pipe is intact, and clean the oil filter and diesel filter element.

9. Check the cylinder pressure or vacuum.

10. Check whether the wheels are installed firmly, whether the tire pressure meets the requirements, and remove the debris embedded in the tread.

11. Parts will be dismantled due to maintenance work. Forklift road test will be conducted after reassembly.

(1) braking performance in different degrees should be free from deviation and snake.on steep slopes, when the hand brake is tightened, it stops reliably.

(2) listen to the normal sound of the engine when it is running under acceleration, deceleration, heavy load or no load.

(3) check whether the brake, transmission, front axle housing and gear pump have overheating after road test for a period of mileage.

(4) whether the lifting speed of cargo fork rack is normal and there is no trembling.

12. Check whether the multi-way reversing valve, lifting cylinder, inclined cylinder, steering cylinder and gear pump work normally.


40 Ton Forklift