Fujian Southchina Heavy Machinery Manufacture Co.,Ltd

Catalogue

Contact US

Address: Road, Taiwanese Investment Area, Quanzhou, Fujian, China

MOB: +86 18859225922

FAX: +86-592-5650876

Email: john@socmachinery.com

          jackson@socmachinery.com

         sunny@socmachinery.com

Website: www.socma-forklift.com

18 Ton Forklift

18 Ton Forklift

HNF-180 Rated load: 18,000 kgs
Load center: 900 mm
Operating weight: 25,500 kgs
Wheel base: 3,800 mm
1, with massive deepen heavy forklift tire, rear steering axle can swing around the center, have good traction performance and passing performance. 2, use Hangchi, Sanchi planet type hydraulic...

Chat Now

    HNF-180

    Rated load: 18,000 kgs

    Load center: 900 mm 

    Operating weight: 25,500 kgs 

    Wheel base: 3,800 mm

    1, with massive deepen heavy forklift tire, rear steering axle can swing around the center, have good traction performance and passing performance. 2, use Hangchi, Sanchi planet type hydraulic power shift transmission, big traction in combined operating condition, the transmission system more reliable. 
    3, hydraulic load sensing steering system, rear steering axle with small turning radius, flexible and light steering 

    4, cooperate with hercynian institute of Chinese Academy of Sciences "overall structure optimization scheme", verifies the stiffness and strength calculation, fatigue life forecast on the forklift, comprehensive finite element mechanics analysis, structure design optimization, ensure the security of the products use 
    4.1, adopt long wheelbase, box double beam frame, can provide good rigidity and strength, to ensure the high reliability of forklift truck chassis
    4.2, inner and outer mast adopt roller operate, the door frame with roller, movable block energy structure, long service life of the mast, high reliability
    4.3, mast lifting height can be up to 3 meters, high mast, low mast, standard mast and a variety of accessories can be fitteed according to customers’ requirements
    4.4, adopted quick hitch shelf, change quickly. Hydraulic fork positioner, easy to adjust. Cascade high strength fork, more wear-resisting, can multiply service life

    5, using four heavy caliper disc brake, thicken brake disc, the rear air tank, 18 times braking pressure strength ratio, heat dissipation faster, reliable and safe operation 6, No spokes plate type rim, increase the bearing capacity of hub.
    18 Ton Forklift

    18 Ton Forklift

    18 Ton Forklift

    18 Ton Forklift

    18 Ton Forklift

    18 Ton Forklift


    How to repair the 18 Ton Forklift driving axle

    2, The repair of forklift driving axle housing’s breakage:

    Using the way of welding to repair the cracks of axle housing’s middle part and cracks on the flange, the detailed operation steps are as follows:

    V-shaped groove with 90 ° crack along the crack, the depth of which is 2/3 of the thickness.

    In the distance between the two ends of the crack 6-10mm, the drill diameter of 5mm hole.

    Welding crack, the welding layer should be higher than the basic metal, but not more than 1mm. After front welding, and then welding its opposite side. The weld should be trimmed after welding.

    The reinforced axle housing after welding, it is necessary to re-test the straightness error, shell cover and flatness error of the main reducer flange plane, and to correct, grinding to meet the standard.

    3,The test and repair of other parts:

    1) Screw thread’s damage should not less than 2 buckle, when over 2 buckle, it can be fixed with thread sleeve to repair or welding to repair it.

    2) When journal wear of Semi-axle casing rolling bearing is more than 0.04mm, it can be chromed.

    3) If semi-axle casing has any cracks and defects, it has to be replaced.

    4) When the axle housing is broken, it should be replaced.

     

    Parameter of 18 Ton Forklift

    Item

    Item details

    Unit


    HNF-180

    Features

    Rated Load

    Q(t)

    18

    Load center

    c(mm)

    900

    Wheelbase

    y(mm)

    3500

    Weight

    Weight

    kg

    26000

    Chassis

    Tyre Specs.:Front


    12.00-24-18PR

    Tyre Specs.:Rear


    12.00-20-18PRR

    Tyres Qty,front/rear      (X-drive wheels)


    4\2

    Wheel tread:Front

    b10(mm)

    2060

    Wheel tread:Rear

    b11(mm)

    2330

    Dimension

    Mast/carriage tilt angle(front/rear)

    Degree(°)

    6\12

    Mast height(fork lowering)

    h1(mm)

    3625

    Mast lifting height

    h3(mm)

    3500

    Max.lifting height

    h4(mm)

    5375

    Height to head guard   (height to cab)

    h6(mm)

    3365

    Overall height(with forks)

    l1(mm)

    7640

    Fork front vertical surface to the rear end of the vehicle

    l2(mm)

    5840

    Overall width

    b1/b2(mm)

    2750

    Fork dimension

    s/e(mm)

    1800X200X100

    Fork carriage width

    b3(mm)

    2380

    Mast min ground clearance  (with load)

    m1(mm)

    265

    Wheelbase center min ground clearance(with load)

    m2(mm)

    325

    Min.Turning radius

    Wa(mm)

    5800

    Travel speed       (with load/without load)

    km/h

    26/30

    Performance

    Max.lifting speed      (with load/without load)

    mm/s

    250/260

    Max.Lowering speed    (with load/without load)

    mm/s

    430/330

    Traction

    N

    15000

    Gradeablity       (with load/without load)

    20/21

    Driving brake


    Hydraulic clamp disc


    Engine brand/model

    Optional one

    Yuchai engine

    Engine


    YC6J175-T302
    6.494L 129KW 2200rpm

    Optional two

    Dongfeng Cummins


    QSB6.7-C190
    6.7L 142KW 2200rpm

    Cylinder No.

    6

    Other

    Transmission gears(Front/rear)


    2\1

    Attachments working pressure

    bar

    160

    Attachments using oil amount

    l/min

    60



Hot Tags: 18 ton forklift, China, manufacturers, factory, customized
Related Products
Inquiry