Fujian Southchina Heavy Machinery Manufacture Co.,Ltd

Catalogue

Contact US

Address: Road, Taiwanese Investment Area, Quanzhou, Fujian, China

MOB: +86 18859225922

FAX: +86-592-5650876

Email: john@socmachinery.com

          jackson@socmachinery.com

         sunny@socmachinery.com

Website: www.socma-forklift.com

16 Ton Forklift

16 Ton Forklift

HNF-160 Rated load: 16,000 kgs
Load center: 900 mm
Operating weight: 24,000 kgs
Wheel base: 3,800 mm
1, using speed limit valve and pressure selector valve, reduce the hydraulic system impact, can lower the mast to the ground when engine flame out 2, adopt double pump confluence working...

Chat Now

    HNF-160

    Rated load: 16,000 kgs

    Load center: 900 mm 

    Operating weight: 24,000 kgs 

    Wheel base: 3,800 mm

    1, using speed limit valve and pressure selector valve, reduce the hydraulic system impact, can lower the mast to the ground when engine flame out 2, adopt double pump confluence working hydraulic system, greatly reduce fuel consumption, energy consumption. Hydraulic system equipped with oil radiator and back pressure protection device, ensure the machine heat balance 3, adopt double turbine hydraulic torque converter, stepless speed change, single lever control for the speed changing, easier for operation.
    4, widely used in airports, ports, docks, stations, warehouses and other big working intensity occasions for loading and unloading, stacking and short-distance transportation 5, front axle adopt heavy duty type driving axle, enlarge size of axle housing, hub and bearing, spiral bevel gear and wheel planetary wheel deceleration increasing twist, steel structure bridge shell support, increase the load capacity and service life.
    6, No spokes plate type rim, increase the bearing capacity of hub.

    16 Ton Forklift

    16 Ton Forklift

    16 Ton Forklift


    How to repair the 16 Ton Forklift driving axle

    The forklift's axle housing is firmly fixed on the forklift’s frame. As the driving axle and the frame are rigidly connected, the driving axle undertakes the most weight when forklift handling cargos, and when forklift working on uneven road or the unequilibrium of fork’s load ,driving axle will come to damages of bending, fracture, axle casing bearing hole wear and axle casing journal wear and so on.

     

    The test and repair of Forklift driving axle housing’s bending

    Test of the axle housing’s bending. Before testing, the first thing is to correct positive half axis and the flatness of the flat contact flange of the hub end, for eliminate the error of its round face runout. Then fixing the standard half-shaft on the driving axle housing, tightening bearing, testing the center of the left half axles and right half axles from housing’s inside to see whether bending or not. The difference between the two axes should less than 0.75mm.

    driving axle housing should be corrected when it over limit. During testing, the deformation should not be greater than the original bending deformation, and should keep the correction pressure for a period of time, in order to make axle housing a certain plastic deformation. If the deformation is too big, bending deformation more than 2mm, the correction can be done after preheat, but the heating temperature is not allowed to exceed 700 ℃. It is better to avoid heating corrections for casted axle housing.

    16 Ton Forklift


    Parameter of 16 Ton Forklift

    Item

    Item details

    Unit



    HNF-150

    HNF-160

    Features

    Rated Load

    Q(t)

    15

    16

    Load center

    c(mm)

    600

    900

    Wheelbase

    y(mm)

    3500

    3500

    Weight

    Weight

    kg

    22000

    25000

    Chassis

    Tyre Specs.:Front


    12.00-24-18PR

    12.00-24-18PR

    Tyre Specs.:Rear


    12.00-20-18PR

    12.00-20-18PR

    Tyres Qty,front/rear      (X-drive wheels)


    4\2

    4\2

    Wheel tread:Front

    b10(mm)

    2060

    2060

    Wheel tread:Rear

    b11(mm)

    2330

    2330

    Dimension

    Mast/carriage tilt angle(front/rear)

    Degree(°)

    6\12

    6\12

    Mast height(fork lowering)

    h1(mm)

    3625

    3625

    Mast lifting height

    h3(mm)

    3500

    3500

    Max.lifting height

    h4(mm)

    5375

    5375

    Height to head guard       (height to cab)

    h6(mm)

    3365

    3365

    Overall height(with forks)

    l1(mm)

    7640

    7640

    Fork front vertical surface to the rear end of the vehicle

    l2(mm)

    5840

    5840

    Overall width

    b1/b2(mm)

    2750

    2750

    Fork dimension

    s/e(mm)

    1800X180X90

    1800X180X90

    Fork carriage width

    b3(mm)

    2380

    2380

    Mast min ground clearance    (with load)

    m1(mm)

    265

    265

    Wheelbase center min ground clearance(with load)

    m2(mm)

    325

    325

    Min.Turning radius

    Wa(mm)

    5800

    5800

    Travel speed          (with load/without load)

    km/h

    26/30

    26/30

    Performance

    Max.lifting speed          (with load/without load)

    mm/s

    250/260

    250/260

    Max.Lowering speed       (with load/without load)

    mm/s

    430/330

    430/330

    Traction

    N

    15000

    15000

    Gradeablity           (with load/without load)

    20/22

    20/21

    Driving brake


    Hydraulic clamp disc

    Hydraulic   clamp disc


    Engine  brand/model

    Optional one

    Yuchai engine

    Yuchai engine

    Engine


    YC6J175-T302
     6.494L 129KW 2200rpm

    YC6J175-T302
     6.494L 129KW 2200rpm

    Optional two

    Dongfeng Cummins

    Dongfeng Cummins


    QSB6.7-C190
     6.7L 142KW 2200rpm

    QSB6.7-C190
     6.7L 142KW 2200rpm

    Cylinder No.

    6

    6

    Others

    Transmission gears(Front/rear)


    2\1

    2\1

    Attachments working pressure

    bar

    160

    160

    Attachments using oil amount

    l/min

    60

    60

     


Hot Tags: 16 ton forklift, China, manufacturers, factory, customized
Related Products
Inquiry